Move to the text

Facilities introduction

Facilities summary

Design

Design
The technical staff carries out cost competitiveness thoroughly from the viewpoint of FMEA, VA, VE and inspects a figure of product which I took from a customer centering on two-dimensional /3 dimension CAD, CAM and does suggestion to be satisfied with.

Die production

Die production
All the dies realized the high exact die production that made full use of an NC machine tool by in-house production. In addition, I deal with the trial manufacture processing at the development stage and cope with the development event of the customer.

Transfer press working

Transfer press working
I produce products with the cost competitiveness from a material cost, the reduction of the processing man-hour by 11 machines.

Press working

Press working
I am fully equipped with the latest NC servo press machine, a link motion press machine and realize high press working.

Exact press working

Exact press working
I realized processing at in micron clearance and the high speed (400 - 800SPM) in stainless steel materials of materials thickness t0.05 which were an IT apparatus product.

The painting

The painting
I found added value to our main product, and the assembling became the in-house production of the painting from the start.

Drying

Drying
I found added value to our main product, and the assembling became the in-house production of the painting from the start.

Inspection

Inspection
We are doing severe quality control at the stage when "a person of processing elaborates it with the posture called an examiner".
Therefore, based on a thought of the conclusion in the own process, all employees keep it in mind to supply only quality goods to a post-process.

Quality control

Quality control
I made full use of a three-dimensional measuring instrument and an image processing measuring instrument, and the measurement of correct and quick product dimensions was enabled. It is an important process to maintain our quality.

Shipment

Shipment
The prefecture realizes outside the prefecture, shipment duties, the logistic to the foreign countries from the start.
In addition, I promote the approaches from consideration to environment of the material to a returnable.

I surface-treat it and remove fat

July, 2011 
I introduce all the highest automatic hydrocarbon vapor washing dryers as removal of fat facilities. In this way, further quality reinforcement, guarantees, short deadline correspondence are possible. In addition, I realized further reduction in cost by the start-to-finish production in the company.

I surface-treat it and plate it

August, 2012
I introduce a tin plating line into Kuragano factory.

Toyota Giken
2155, Shiroishi, Fujioka-shi, Gunma
TEL. 0274-40-7234

General affairs, business:
Fax. 0274-40-7118
Quality control:
Fax. 0274-40-7117


1.Parts for the car lighting
2.Exact press die design production

3.The heat-resistant painting
4.Surface-treat


0
0
0
2
1
1
Back to TOP